|
VRSC ( Street rod / Night rod / V-Rod
) |
|
Wheel:$600 per set or Polish=$300 per set |
|
Swing Arm:$275 Chrome (Aluminum) or $175 polish |
|
Cam Cover 4PCS : $160 |
|
Clutch Actuator:$20 |
|
Sprocket Cover:$65 |
|
Water Pump cover:$45 |
|
Clutch Cover:$125 |
|
Derby Cover:$20 |
|
Alternator cover:$100 |
|
Belt Pulley:$140 |
|
Lower legs chrome=$145 or polish $95 |
|
Brake Calipers:$85 and $95 |
|
Brake Rotor= $55 polish |
|
Master cylinder:75 Top cap:$10 |
|
Cluch perch=$35 |
|
belt guard=$150 |
|
4PCS Switch Housing:$80 |
|
Hand Levers:$25 each |
|
Rear Brake pedal=$35 |
|
Shifter:$35 |
|
Peg Bracket:$35 each |
|
Kickstand = $50 |
|
|
|
SPORTSTER ( 883 Sporster/ 1200R
sportster / 1200 Roadster / 1200C custom) |
|
Wheels:$550 per set (10 spokes ) chrome |
|
Wheels:$575 per set ( 5 spokes ) chrome |
|
Swing Arm:$175 (Steel ) |
|
Gear Case Cover:$150 |
|
Sprocket Cover:$85 |
|
Primary Cover:$175 |
|
DerbyCover:$35 / Inspection Cover:$10 |
|
4PCS
Rocker Box Cover:$180 |
|
6PCS Rocker Box Cover:$250 |
|
Shift Lever:$35 |
|
Lifter Cover:$20 |
|
Belt Pulley:$140 |
|
Lower Forks:$145
per set include cap |
|
Calipers:$85 and $95 each |
|
Brake Rotor= $55 polish |
|
Brake Pedal:$35 |
|
belt guard=$70 |
|
4PCS Switch Housing:$80 |
|
|
|
DYNA ( Wide Glid / Low Rider ) |
|
wheels:$575 per set |
|
Swing Arm:$225 |
|
2 Transmission Covers:$100 |
|
4PCS Rocker Box:$160 |
|
PrimaryCover:$175 |
|
DerbyCover:$35 |
|
CamCover:$85 |
|
TappetCover:$20
each |
|
Forks:$145 PerSet |
|
Battery Cover:$45 |
|
MasterCylinder:$60 cap$10 |
|
BeltGuards:$50-$100 |
|
Calipers:$85 and $95 each |
|
4PCS Switch Housing:$80 |
|
Hand levers:$25 each |
|
Riser and clamp 3 pcs. =$90 |
|
Brake rotor polish=$55 |
|
|
|
SOFTAIL ( Classic / Deuce / Night
Train ) |
|
Wheels:$575 ( the newer version with wide rim cost
$625 ) |
|
Wheels solid Deuce=$275 |
|
Wheel solid fatboy=$550 |
|
SwingArm:$250 |
|
4PCS Rocker Box Cover:$160 |
|
Transmission Covers:$50 each |
|
TappetCover:$20each |
|
BeltPulley:$125; |
|
PrimaryCover:$175 |
|
DerbyCover:$25 |
|
CamCover:$80 |
|
InnerPrimary:$165 |
|
Brake Rotors:$55 polish, B.Rotors Chrome:$65 |
|
Brake Calipers:$55( 1 pcs Caliper) and $95( 2 pcs
Caliper) |
|
Front large peg Brackets: $85 each |
|
Rear Brake pedal=$35 |
|
Hand Levers:$25 each |
|
Passenger Footboard support ( T brackets):$35 each |
|
Passenger Footboard= $50 each |
|
4PCS Switch Housing:$80 |
|
Lower legs chrome=$145 or polish $95 |
|
|
|
Touring ( Street Glide / Road Glide /
road King )
|
|
Wheels:$550 per set ( 9 spokes ) chrome ,
Removing the Tabs cost $50 Extra |
|
Wheels:$575 per set ( 5 spokes ) chrome |
|
Swing Arm:$250 (Steel ) |
|
Gear Case Cover:$150 |
|
Sprocket Cover:$85 |
|
Primary Cover:$175 / Inner Primary =$165 |
|
Derby Cover:$35 / Inspection Cover:$10 |
|
4PCS
Rocker Box Cover:$180 |
|
Hand levers = $25 each |
|
Shift Lever:$35 |
|
Lifter Cover:$20 |
|
Belt Pulley:$140 |
|
Lower Forks:$145
per set include cap |
|
Calipers:$85 and $95 each |
|
Brake Rotor= $55 polish |
|
Brake Pedal:$35 |
|
belt guard=$70 |
|
4PCS Switch Housing:$80 |
|
|
|
BOLT/WASHER/NUT $1 each chrome or 0.75$ polish stainless
|
In general never sand blast Aluminum parts before
shipping them, we do all the stripping with Aluminum safe strippers.
In the case of brake and clutch reservoirs please be
aware that the window may get etched and discolored, we have not seen any
case of leakage yet , We have had customers who successfully removed the
window frame prior to plating by pushing it out, from inside. although we
wouldn’t recommend. ( you can’t buy just the window frame)
if you can't see a part in the table please email us so
we can add them here.
If you have similar information please e-mail us , We
can add them to this page.
